Please visit the Waters Knowledge Base to stay up to date on the latest documentation.
If you are a new user, please register using the Register button so you can participate in the forum discussions!
For users of ACQUITY UPLC and UHPLC instruments, systems, and columns.
Stay connected, keep informed, and communicate directly with the Waters software user community.
* 2489 shows "yes" for status ok in the node properties * 2489 Channel is Active * 2489 instrument control panel display empty * Monitor Baseline is possible. * Ethernet connection. * It won't stop after run time is over. * No signal is saved for 2489, pressure signal for e2695 is saved.
My one peak real CF custom field: Mean_Area = (S2.1.(Area)+S3.1.(Area)+S3.2.(Area)+S3.3.(Area)+S3.4.(Area))/5 and another peak real CF custom field: Area_RSD…
Hello, i would like to create a custom field, which i inject 5 standards. Each standard contains 5 peaks and one peak internal standard (total 6 peaks). Then i inject the second standard for % recovery. The calculation for each peak: (ARstd2/ARstd1)*(Wstd1/Wstd2)*100 ARstd2=Area(solvent)/Area(internal std) (of second…
I have the following four components: Single Peak 1 Single Peak 2 Single Peak 3 Named Group (which is a group of Peak 1, 2 and 3) Each individual peak also has a unique RRF: Peak 1 has an RRF of 1.0 Peak 2 has an RRF of 1.3 Peak 3 has an RRF of 1.5 The equation in my method is: (Sample Total Peak Area) / (Std Total Peak…
We have the "Photo Diode Array" option enabled on all of our projects. While the majority of our analysis does not require to use this feature, we do occasionally need to use it hence it being activated in all projects. When I open a Result Set or Sample Set in review it will automatically open the spectra window alongside…
Hi all, regarding the Report, is there any way to customize the component amount for STD and Control? I didn't find any way to do this using the "Sample Component amount group." Thanks.
Hi all, I create a Named Group (Know Imp Perc) and CF (Know Imp Percentage). Unfortunately, I don't have the sum results as expected (highlighted in yellow). Any help.
Hi I'm now and I like this forum so far
I found it I have no access to copy preference to other project in Configure System in Empower. Which privilege do I need?
My wash syringe leak test is failing after PM, only the strong side failed. No leaks were observed. Strong wash syringe replaced again, but the results are the same. Put the original syringe back on and still failing. Looking for ideas on what to try next
It looks like you're new here. Sign in or register to get started.
“Use this space to add a Customer Spotlight by telling the customer's story using their unique language, share what problems they experienced, and how they conquered it by using your product(s).”
